Maintain and detect several points of attention for the NTN bearing
1. In the process of using NTN bearing, regular cleaning is very important.How are bearings cleaned accurately?When the bearing is removed and searched, the appearance is recorded by means of photography.In addition, check the amount of remaining lubricant and sample the lubricant before cleaning the bearing.
2. The cleaning of the bearing is suspended by rough washing and fine washing, and the metal grid rack can be placed at the bottom of the container in use.
3. During rough washing, clean grease or adhesive with brush at oil top.At this time, if the oil in the migration and transformation of bearing, injection blend due to foreign bodies and other damage rolling surface.
4. When finishing, transfer the bearing slowly in the oil, it must be suspended vigorously.
5. The cleaning agent used in daily life is neutral non-water-containing diesel oil or petroleum, and sometimes warm alkali liquor is used according to the demand.No matter what kind of cleaning agent you use, always filter the confrontation clean.
6. Immediately apply anti-rust oil or anti-rust grease on the NTN bearing after cleaning.